Which MCU and Which compiler?

Hi again.

Lets start with a simple program with PIC MCU.

I choose PIC16F690 because  it's very use full and have lots of functionality like TIMER, PWM, ADC and so on. It also has 18 pin General Purpose Input/Output (GPIO).

What is GPIO and what is the difference?

When a MCU has GPIO, it means each pin on the mcu has different configuration, as you can see in picture blow:



figure from PIC16F690 datasheet



for example pin 14 in this chip has 3 functionality, it is PIN3 of POTR C , also it's Analog PIN6  moreover it's PWM PIN1D.

As you already know I don't want to go to detailes. Let's see some real action ;)

For working with PIC MCU you need to download a programing software named MPLAB.

It's free and easy to download from this link:

link to download MPLABX IDE

 

Download latest version.

Download latest version. With this software you can program all Microchip products with assembly language. But, it’s hard to understand assembly language for beginners.

 

It's easier to use a high level programming language like C/C++. Therefore, we must use a C/C++ compiler such as hi-tech C or XC8/XC16/XC32 compiler.

You can download hi-tech C from here.

 



Link to download CX compiler is here. This link is same as MPLAB IDE at the end of the page or at the left side you can see the links for direct download.

Both of these software have free version both during installation don't forget to choose free version.

Now we have enough tools to start our first code in the next post.